Tinkerbell - Ready to ship

Please note: while the transfers are waterproof, Hand wash ONLY!

How to apply
1. Peel transfer off the backing sheet
2. Place the transfer on the cup (making sure the design is straight and positioned correctly).
3. Press the transfer down, pushing out any air bubbles(if you can't push all the air bubbles out, use a pin to put a tiny pin prick then push the air bubbles out)
4. Rub all over the design with your fingers or silicone applicator.
5. Peel the clear film off against itself (please do not rip the transfer tape off. Be patient and do it slowly to ensure the transfer is applied properly).

WARNING: The adhesive is extremely strong! Once the transfer touches the substrate it's almost impossible to remove. Please be careful when applying. 

NO HEAT REQUIRED - PEEL AND TRANSFER!